Table of Contents
Advertisement
2. Implementing Protocols in Arria 10 Transceivers
UG-01143 | 2018.06.15
Table 41.
Configuration Files
Parameter
Configuration file
prefix
Generate
SystemVerilog
package file
Generate C header file
Generate MIF (Memory
Initialization File)
Include PMA analog
settings in
configuration files
Table 42.
Configuration Profiles
Parameter
Value
Enable
On/Off
multiple
reconfiguratio
n profiles
Enable
On/Off
embedded
reconfiguratio
n streamer
Generate
On/Off
reduced
reconfiguratio
n files
Number of
1-8
reconfiguratio
n profiles
Selected
0-7
reconfiguratio
n profile
(28)
For more information on timing closure, refer to the Reconfiguration Interface and Dynamic
Reconfiguration chapter.
Value
<prefix>
Here, the file prefix to use for generated configuration files is
specified. Each variant of the Transceiver Native PHY IP should use
a unique prefix for configuration files.
On/Off
When you turn on this option, the Transceiver Native PHY IP
generates a SystemVerilog package file,
reconfig_parameters.sv. This file contains parameters defined
with the attribute values required for reconfiguration.
On/Off
When you turn on this option, the Transceiver Native PHY IP
generates a C header file, reconfig_parameters.h. This file
contains macros defined with the attribute values required for
reconfiguration.
On/Off
When you turn on this option, the Transceiver Native PHY IP
generates a MIF, reconfig_parameters.mif. This file contains the
attribute values required for reconfiguration in a data format.
On/Off
When enabled, the IP allows you to configure the PMA analog
settings that are selected in the Analog PMA settings (Optional)
tab. These settings are included in your generated configuration
files.
Note: You must still specify the analog settings for your current
configuration using Quartus Prime Setting File (.qsf)
assignments in Quartus. This option does not remove the
requirement to specify Quartus Prime Setting File (.qsf)
assignments for your analog settings. Refer to the Analog
Parameter Settings chapter in the Arria 10 Transceiver PHY
User Guide for details on using the QSF assignments.
When enabled, you can use the GUI to store multiple configurations. This information is
used by Quartus to include the necessary timing arcs for all configurations during timing
driven compilation. The Native PHY generates reconfiguration files for all of the stored
profiles. The Native PHY also checks your multiple reconfiguration profiles for
consistency to ensure you can reconfigure between them. Among other things this
checks that you have exposed the same ports for each configuration.
Enables the embedded reconfiguration streamer, which automates the dynamic
reconfiguration process between multiple predefined configuration profiles. This is
optional and increases logic utilization. The PHY includes all of the logic and data
necessary to dynamically reconfigure between pre-configured profiles.
When enabled, The Native PHY generates reconfiguration report files containing only the
attributes or RAM data that are different between the multiple configured profiles. The
reconfiguration time decreases with the use of reduced .mif files.
Specifies the number of reconfiguration profiles to support when multiple reconfiguration
profiles are enabled.
Selects which reconfiguration profile to store/load/clear/refresh, when clicking the
relevant button for the selected profile.
Description
Description
®
®
Intel
Arria
10 Transceiver PHY User Guide
(28)
continued...
69
Hide quick links:
Advertisement
Table of Contents
