Area Nssa - Dell Z9500 Command Reference Manual

cost
Defaults cost = 1; no areas are configured.
Command ROUTER OSPF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Usage In the Dell Networking operating software, cost is defined as reference
Information bandwidth/bandwidth.
Related area stub
Commands

area nssa

Specify an area as a not so stubby area (NSSA).
Z9500
Syntax
area area-id nssa [default-information-originate] [no-
redistribution] [no-summary]
To delete an NSSA, use the no area area-id nssa command.
Parameters
area-id
no-
redistribution
Open Shortest Path First (OSPFv2 and OSPFv3)
Specifies the stub area's advertised external route metric. The
range is from zero (0) to 65535.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— creates a stub area.
Specify the OSPF area in dotted decimal format (A.B.C.D.) or
enter a number from zero (0) to 65535.
(OPTIONAL) Specify that the redistribute command does
not distribute routes into the NSSA. Only use this command
in an NSSA area border router (ABR).
1253