Terminal Monitor - Dell S6100 Configuration Manual

Cannot enable psu -127228353
2:Task(tUsrRoot): [
block failed checksum calulated checksum 0x1d actual chksum 0x0
3:Task(tUsrRoot): [
block failed errcode 6
4:Task(tUsrRoot): [
Redundant block failed checksum calulated checksum 0xc9a6 actual
chksum
5:Task(tUsrRoot): [
Redundant block failed errcode 6
6:Task(tUsrRoot): [
failed to get any good block
7:Task(tUsrRoot): [
block failed checksum calulated checksum 0x1d actual chksum 0x0
8:Task(tUsrRoot): [
block failed errcode 6
9:Task(tUsrRoot): [
Redundant block failed checksum calulated checksum 0xc9a6 actual
chksum
10:Task(tUsrRoot): [
Redundant block failed errcode 6
Usage Information This command displays internal software driver information, which may be useful during troubleshooting switch
initialization errors, such as a downed Port-Pipe.

terminal monitor

Configure the Dell Networking OS to display messages on the monitor/terminal.
Syntax terminal monitor
To return to default settings, use the terminal no monitor command.
defaults Disabled.
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.2(0.0)
9.0.2.0
8.3.19.0
EXEC
EXEC Privilege
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux
(PMUX) mode only.
Introduced on the S6000.
Introduced on the S4820T.
6876]EEPROM LIB ERR: f10EepromBlkRead@psu0eeprom: Main
61]EEPROM LIB ERR: f10EepromBlkRead@psu0eeprom: Main
89]EEPROM LIB ERR: f10EepromBlkRead@psu0eeprom:
0x0
57]EEPROM LIB ERR: f10EepromBlkRead@psu0eeprom:
51]EEPROM LIB ERR: f10EepromBlkRead@psu0eeprom,
75]EEPROM LIB ERR: f10EepromBlkRead@psu0eeprom: Main
55]EEPROM LIB ERR: f10EepromBlkRead@psu0eeprom: Main
62]EEPROM LIB ERR: f10EepromBlkRead@psu0eeprom:
0x0
55]EEPROM LIB ERR: f10EepromBlkRead@psu0eeprom:
Simple Network Management Protocol (SNMP) and Syslog 1539