Dell S6100 Configuration Manual page 1573

brief
guard
interface interface
root
summary
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.5.1.0
8.4.2.1
8.3.7.0
7.7.1.0
7.5.1.0
(OPTIONAL) Enter the keyword brief to display a synopsis of the spanning tree group
configuration information.
(OPTIONAL) Enter the keyword guard to display the type of guard enabled on an STP
interface and the current port state.
(OPTIONAL) Enter the keyword interface and the type slot/port of the interface you
want displayed. Type slot/port options are the following:
• For a port-channel interface, enter the keywords port-channel then the port-
channel ID.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
(OPTIONAL) Enter the keyword root to display configuration information on the
spanning tree group root.
(OPTIONAL) Enter the keyword summary to only the number of ports in the spanning
tree group and their state.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on the E-Series.
Added support for the optional guard keyword on the C-Series, S-Series, and E-Series.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Spanning Tree Protocol (STP) 1573