Adj 5.1 Dadf Side Edge Registration Adjustment - Xerox Phaser 3635MFP Service Manual

ADJ 5.1 DADF Side Edge Registration Adjustment

Purpose
To correctly set the DADF side edge registration.
Procedure
Perform the following:
1. Remove the input tray assembly, PL 5.15 Item
2. Remove the lower cover, PL 5.15 Item
3. Carefully move both document guide racks to the front or the rear to adjust the registra-
tion, PL 5.20 Item 4.
NOTE: Moving both document guides 1 tooth on the pinion gear
adjust the registration by approximately 3mm (0.1 inch).
4. Assemble the input tray assembly.
5. Use the DADF to make 10 copies of a document. Check the registration, refer to
Registration. If necessary, re-adjust the registration.
Phaser 3635MFP/WorkCentre 3550
2.
1.
(PL 5.20 Item 5) will
IQS 3
April 2010
4-47
Repairs and Adjustments
ADJ 5.1