Media Output Locations; Using The Output Tray - Xerox B205 User Manual

Media Output Locations

The device has two output locations:
• Output tray, face down, up to a maximum of 120 sheets
of 20 lb (80 g/m²) paper.
• Rear cover, face up, one sheet at a time.
The device sends output to the output tray by default. If special media, such as envelopes, print out
with wrinkles, curl, creases, or black bold lines, the rear cover should be used for the output. Open the
rear cover and keep it open while printing one sheet at a time.

Using the Output Tray

The output tray collects printed paper face down, in the order in which the sheets were printed. The
output tray should be used for most jobs. When the output tray is full, a message displays on the
control panel.
To use the output tray, make sure that the rear cover is closed.
Notes:
• If paper coming out of the output tray has problems, such as excessive curl, try printing
to the rear cover.
• To reduce paper jams, do not open or close the rear cover while the printer is printing.
Media Output Locations
Xerox B205 Multifunction Printer
®
User Guide
164