Rep 9.1.1 Output Tray - Xerox WorkCentre 5020 Service Documentation

REP 9.1.1 Output Tray

Parts List on PL 9.1
Removal
To avoid personal injury or electrical shock, ensure that the machine is completely off
before disassembling or adjusting. Turn OFF the power and unplug the machine.
1. Open the Front Cover.
2. Remove the Output Tray (Figure 1).
1 Remove the Tapping Screws (2).
2 Remove the Output Tray by pulling it in the direction of the arrow.
Initial Issue
WorkCentre 5020
WARNING
Figure 1
Replacement
1. To install, do the removal steps in reverse order.
2. Perform the following steps to install the Output Tray (Figure 2).
1 Insert the tabs (2) into the square hole of the frame.
2 Attach the hook.
July, 2007
4-61
Figure 2
Repairs and Adjustments
REP 9.1.1