Key Path
Auto Trig Sets the time that the analyzer will wait for the trigger conditions to be met. If
they are not met after that much time, then the analyzer is triggered anyway. Auto Trig
defaults to off and is not accessible remotely.
Preset
State Saved
Min
Max
Key Path
Peak Search
Accesses the marker peak functions and places a marker on the highest peak of the
currently selected trace.
Mode:
Remote Command
Example
Key Path
Next Peak
Places the selected marker on the next highest signal peak from the current marked peak.
Mode
Remote Command
Example
Key Path
Chapter 3
Meas Setup, Trigger, Trig Delay
2 s, OFF
Saved in State
0 s
100 s
Meas Setup, Trigger, Auto Trig
All
:CALCulate:MARKer[1]|2|3|4:MAXimum
CALC:MARK2:MAX
Front-panel key
All
:CALCulate:MARKer[1]|2|3|4:MAXimum:NEXT
CALC:MARK2:MAX:NEXT
Peak Search, Next Peak, Next Peak
Meas Off (Spectrum Analyzer) Measurement
Mode
75