Performing Common File Operations
This section covers:
• Formatting a diskette
• Saving a file
• Loading a file
• Renaming a file
• Coping a file
• Deleting a file
Formatting a Diskette
The format is MS-DOS. It is not necessary to format your diskette with
the Noise Figure Analyzer; pre-formatted disks can be used with the
Noise Figure Analyzer.
Step 1. Place the diskette you wish to format into the diskette drive (A:\) of the
Noise Figure Analyzer.
Step 2. Access the file manager menu by pressing
Figure 1-5.
Chapter 1
Performing Common File Operations
key,
File
File Manager
Getting Started
. See
13