Automatically Executing A Search Each Time A Sweep Is Done (Search Tracking) - Agilent Technologies ENA Series User Manual

Softkey
Search Right
NOTE When the data format is in Smith chart or polar format, execute the search for the main
response value of the two marker response values.
Automatically Executing a Search Each Time a Sweep is Done (Search
Tracking)
Search tracking is a function that causes a search to be repeated every time a sweep is done
even if the execution key for the search (maximum, minimum, peak, and target) is not
pressed. This function facilitates that measurement dispersion be observed, such as the
maximum value of traces (e.g., the insertion loss of a bandpass filter).
Performing Search Tracking
Step 1. Press
which search tracking is set up.
Step 2. Press
Step 3. Press
Chapter 6
(or
.
, and turn the search tracking function on or off.
Tracking
Analyzing Data on the Trace Using the Marker
Function
Execute the right search.
) and (or
Data Analysis
) to activate the trace on
141