Instr State Block - Agilent Technologies ENA Series User Manual

Rf network analyzers
Hide thumbs Also See for ENA Series:
Table of Contents

Advertisement

9. INSTR STATE Block

A group of keys related to the macro function, store and call function, control/management
function, and the presetting of the E5070B/E5071B (returning it to the preset state).
Key
Key
Key
Key
Key
Key
*1.Strictly speaking, the temporary save occurs the moment the "System Menu" is manip-
ulated. Therefore, this also occurs when the menu bar is used to execute
.
System
Chapter 2
Front Panel: Names and Functions of Parts
Displays the "Macro Setup Menu" on page 693 on the
right side of the screen. Manipulating the "Macro Setup
Menu" enables you to start up the VBA editor or to
create, call, or store a VBA project.
Executes a VBA procedure called "main" that has a VBA
module named Module1.
Stops the VBA procedure being executed.
Displays the "Save/Recall Menu" on page 709 on the
right side of the screen. Manipulating the "Save/Recall
Menu" enables you to store to or read from the internal
hard disk or floppy disk the setup conditions, calibration
data, and trace data of the analyzer.
First, temporarily saves the data for the image displayed
on the LCD screen the moment this key is pressed
the internal memory (clipboard). Immediately after that,
displays the "System Menu" on page 718 on the right side
of the screen. Manipulating the "System Menu" enables
you to define the setup for the limit test and then execute
it or to define the setup for the control and management of
the analyzer. Using the
Dump Screen Image
you to store the image data in the clipboard to a file on the
internal hard disk or a floppy disk. Also, using the
key in the System menu enables you to print the image
data in the clipboard to a printer.
Displays the "Preset Menu" on page 708 on the right side
of the screen. Pressing
in the "Preset Menu" enables
OK
you to return the analyzer to the initial setup state, called
the preset setup. For details on the initial setup for each of
the functions, see Appendix C, "List of Default Values,"
on page 629.
Overview of Functions
*1
to
key enables
Print
-
5 Instr State
5
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

E5070bE5071b

Table of Contents