Instrument State Function Block - Agilent Technologies 8719D User Manual

The ENTRY block. This block includes the knob, the step QD QD keys, the number pad,
8.
and the backspace @ key. These allow you to enter numerical data and control the
markers.
You can use the numeric keypad to select digits, decimal points, and a minus sign for
numerical entries. You must also select a units terminator to complete value inputs.
The backspace key @ has two independent functions: it modifies or deletes entries, and
it turns off the softkey menu so that marker information can be moveed off of the grids
and into the softkey menu area.
INSTRUMENT STATE function block. These keys allow you to control
9.
channel-independent system functions such as the following:
copying, save/recall, and HP-IB controller mode
n
limit testing
n
tuned receiver mode
n
frequency offset mode (Option 089)
n
test sequence function
n
HP-IB STATUS indicators are also included in this block.
10.
user preset state that can be defined. Refer to the "Preset State and Memory Allocation"
chapter for a complete listing of the instrument preset condition.
11.
analyzer's R channel, for frequency offset mode.
PORT 1 and PORT 2. These ports output a signal from the source and receive input
12.
signals from a device under test. PORT 1 allows you to measure SK! and S11. PORT 2
These connectors allow you to apply an input signal to the
HP 87 1~0/200/220 Description and Options