Instr State Block - Agilent Technologies ENA Series User Manual

9. INSTR STATE Block

A group of the keys related to the macro function, store and call function,
control/management function, and presetting the E5070/E5071A (returning it to the preset
state).
Key
Key
Key
Key
Key
Key
*1.Strictly speaking, the temporary save occurs the moment the System softkey menu is
manipulated. Therefore, this also occurs when the menu bar is used to execute
- .
State 5 System
Chapter 2
Front Panel: Names and Functions of Parts
Displays the VBA Macro softkey menu on the right side
of the screen. Manipulating the VBA Macro menu
enables you to start up the VBA editor, or create, call, or
store a VBA project.
Executes a VBA procedure called "main" having a VBA
module named Module1.
Stops the VBA procedure being executed.
Displays the Save/Recall softkey menu on the right side
of the screen. Manipulating the Save/Recall menu enables
you to store to or read from the internal hard disk or
floppy disk the setup conditions, calibration data, and
trace data of the analyzer.
First, temporarily saves the data for the image displayed
on the LCD screen the moment this key is pressed
the internal memory (clipboard). Immediately after,
displays the System softkey menu on the right side of the
screen. Manipulating the System menu enables you to
define the setup for and execute the limit test or define the
setup concerning the control and management of the
analyzer. Using the
Dump Screen Image
to store the image data in the clipboard to a file on the
internal hard disk or a floppy disk. Also, using the
key in the System menu enables you to print the image
data in the clipboard to a printer.
Displays the Preset softkey menu on the right side of the
screen. Pressing in the Preset menu enables you to
OK
return the analyzer to the initial setup state, called the
preset setup. For the initial setup for each of the functions,
see Appendix C, "List of Default Values," on page 391.
Overview of Functions
*1
to
key enables you
Print
5 Instr
31