Table of Contents
Advertisement
Tandem Connection Monitoring
Setting up TCM Access Point Identifier (APId) messages
Setting up TCM Access Point Identifier (APId)
messages
Description
The OmniBER offers the choice of transmitting in N1 (High Order Path or Low
Order Path if TU-3) or N2 (Low Order Path) bytes the following messages:
• DEFAULT - A null APId message.
• TEST - A fixed test message "<serial number>"
• USER - A user definable 15 byte message followed by a one byte CRC.
The CRC is automatically calculated for all three message types.
HOWTO
1 Press the
2 Select the
3 Set the TCM PATH field to
4 Select the
of the following two methods:
Method 1:
5 Select the SETUP field and choose
6 Set the N1 or N2 field as required from DEFAULT, TEST or USER. If you select
USER, use the edit keys at the bottom of the screen to set up your message.
228
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key and select
TRANSMIT
folder.
MAIN SETTINGS
HIGH ORDER
folder and set up the APId messages using one
OVERHEAD SETUP
TCM MESSAGE
SDH
.
or
as required.
LOW ORDER
.
Advertisement
Table of Contents
