Setting the Point Trigger
The point trigger provides a point measurement at every trigger, and it can be used to
change the trigger event to point trigger mode.
Table 5-4
Trigger mode
Trigger event name
On (
Off (
NOTE
When the trigger source is selected as the internal trigger, the point trigger does not work.
Procedure to Set the Point Trigger
1. Selecting a Trigger Event
Follow the procedure below to select a trigger event.
Step 1. Press
Step 2. Press
Step 3. Press the softkey that corresponds to the desired trigger event.
Softkey
On Point
On Sweep
Chapter 5
Function
)
Point measurement is performed when trigger is applied.
On Point
)
Measurement is performed for all measurement points when
On Sweep
trigger is applied.
.
.
Trigger Event
Function
Measures at each measurement point
Measures all measurement points
Making Measurements
Setting the Point Trigger
245