NEC Univerge sv8500 Manual page 106

1.2.6 Setting up DHCP Address Static (Microsoft Windows 2000)
By the following setting, a DHCP client is always assigned the same IP address. In consideration of network
security, etc., follow the procedure below if necessary.
DHCP Server must be installed in advance.
Note:
STEP 1: Start DHCP Manager and open the following dialog box. Select the "Reservation" under the activated
scope in the tree.
STEP 2: Select "Action" -> "New Reservation" on the menu bar.
STEP 3: The following dialog box appears. Enter the appropriate IP address and MAC address. Then click
"Add" button. After all the necessary IP addresses are set, click "Close" button.
CHAPTER 1 DEVICES REQUIRED TO BUILD NETWORK
VOL.1-46