Rear Prop Shaft Installation (4 Seater) - Polaris RZR 900 2015 Service Manual

FINAL DRIVE
7. Slide the prop shaft to the rear of the vehicle until the
front of the shaft clears the frame support and slide
the prop shaft forward out of the vehicle.
REAR PROP SHAFT INSTALLATION (4
SEATER)
1. Reverse the appropriate Rear Prop Shaft Removal (4
seater), page 7.21 procedure to reinstall the rear prop
shaft.
2. Lubricate the transmission output shaft splines with
Polaris All Purpose Grease.
3. Lubricate the front and rear prop shaft mid joint with
Polaris All Purpose Grease.
4. Align the front and rear prop shafts and slide them
together.
9926814 R08 -
7.22
Paint marks are applied to the front and rear propshafts
to aid shaft alignment. Reference these marks during
5. Torque the support bearing fasteners to specification.
Support Bearing Fasteners:
2015-2016 RZR 900
NOTE
installation if still visible.
TORQUE
33 ft-lb (45 Nm)
2016 RZR S 1000 Service
© Copyright Polaris Industries Inc.
Manual