Locating The Chassis Serial Number Id Label On An Ex4600 Switch; Locating The Serial Number Id Labels On Fru Components; Figure 46: Location Of The Serial Number Id Label On An Ex4600 Switch - Juniper EX4600 Series Hardware Manual

Locating the Chassis Serial Number ID Label on an EX4600 Switch

Locating the Serial Number ID Labels on FRU Components

Copyright © 2014, Juniper Networks, Inc.
Fan Tray 3
to Back Airflow - AFO
Fan Tray 4
to Back Airflow - AFO
{master:0}
root@RIDGE_IEEE>
root@RIDGE_IEEE> show version
fpc0:
NOTE: The EX4600 and QFX5100 use the same fan modules. These modules
are represented in CLI output as QFX5100 fan trays.
NOTE: You must remove the fan module to read the fan serial number from
the serial number ID label. The fan module serial number cannot be viewed
through the CLI.
from 0.
The location for the chassis serial number ID label is found to the right of the 40 Gigabit
Ethernet ports. See Figure 46 on page 205
ID on the EX4600 switch.

Figure 46: Location of the Serial Number ID Label on an EX4600 Switch

SN:TC3113280064
The power supplies, fan module, and expansion modules installed in EX4600 switches
are field-replaceable units (FRUs). For each FRU, you must remove the FRU from the
switch chassis to see the FRU serial number ID label.
AC power supply—The serial number ID label is on the top of the AC power supply.
Fan module—The serial number ID label is on the top of the fan module.
Expansion module–The serial number ID label is in the middle of the printed circuit
board (PCB).
refers to the third module from the left, counting
Fan Tray 2
for an example of where to find the serial number
Chapter 25: Returning Hardware
QFX5100 Fan Tray 3, Front
QFX5100 Fan Tray 4, Front
205