Host Subsystem Leds; Fan Leds; Power Supply (Pem) Leds; Switch Fabric Leds And Control Buttons - Juniper EX9214 Hardware Manual

Figure 7 on page 30 shows the craft interface in an EX9204 switch.
craft interface in an EX9208 switch.
switch.
Figure 7: Craft Interface in an EX9204 Switch

Host subsystem LEDs

1
—
2

Fan LEDs

—
3 Power supply LEDs
—
4 Minor alarm LED
—
NOTE: You can install a line card or an SF module in the multifunctional slot labeled 1|0 in
EX9204 switches. The corresponding LED displays information depending on the hardware
installed in that slot.
Figure 8: Craft Interface in an EX9208 Switch
Host subsystem LEDs
1
—
Fan LEDs
2
—
3 Power supply LEDs
—
4 Minor alarm LED
—
Figure 9 on page 31 shows the craft interface in an EX9214
Major alarm LED
5
—
6 Alarm cutoff/lamp test button
—
7 Alarm relay contacts
—
8 LEDs and control buttons for Switch Fabric
—
and Line cards
Alarm cutoff/lamp test button
6
—
Alarm relay contacts
7
—
8

Switch Fabric LEDs and control buttons

—
9

Line card LEDs and control buttons

—
Figure 8 on page 30 shows the
30