Avaya S8700 Maintenance Manual page 94

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Alarms, Errors, and Troubleshooting

Complete the following steps:

1. Enter display alarms with category pnc.

Are there any on-board alarms? If so, replace the circuit pack(s).

2. Enter display errors for category pnc.

Check for any of the following errors:

If one or more of the previous errors are present, proceed with

If not, look for SNI-PEER errors.

Issue 1 May 2002

If there is one SNI circuit pack with many different SNI-PEER error

types, replace the indicated SNI circuit pack.

Troubleshooting