Rep 8.2.3.7 Bin 1 Assembly - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.2.3.7 Bin 1 Assembly

Parts List on PL 8.2.2.4

1 Switch off the printer power and disconnect the AC Power Cord.

2 Remove stopper wire.

3 Remove Mailbox Left Cover Assembly (REP 8.2.3.1).

4 Remove the Mailbox Front Cover Assembly (REP 8.2.3.2).

5 Remove the Mailbox Rear Cover Assembly (REP 8.2.3.3).

6 Remove the Mailbox Top Cover Assembly (REP 8.2.3.4).

7 Remove the ACT Cover Assembly (REP 8.2.3.5).

8 Remove the screw securing the LED and LED Cover to the Bin 1 Assembly, and remove the LED

and LED Cover (Inset 1) (Figure 8.2.3.7a).

9 Slip the Drive Belt off of Bin 1 Drive Pulley (Figure 8.2.3.7a).

10 Remove the three screws securing Bin 1 to the Mailbox frame (Figure 8.2.3.7a).

11 Pull out on latch arms to release the latch that is securing Bin 1 Assembly to Bin 2 Gate (inset 2)

and remove Bin 1 Assembly (Figure 8.2.3.7a).

DocuPrint N24, N32 and N40 Service Manual

Figure 8.2.3.7a. Bin 1 Assembly.

Table of Contents