Rep 4.2.8 Tray 1 & 2 Lift Up Sensor - Xerox DocuPrint N24 Service Manual

REP 4.2.8 Tray 1 & 2 Lift Up Sensor
Parts List on PL 3.1 / PL 3.4
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Tray 1 / Tray 2.
3 Hold the feed rolls down with your hand or use a folded sheet of paper to hold the feed rolls
down.
4 Release the lock tabs on the back of the Lift Up Sensor (Figure 4.2.8a).
5 Disconnect the harness from the sensor.
Replacement
1 Assemble in reverse order.
2 Verify proper operation.
Repair Procedures
Figure 4.2.8a. Lift Up Sensor.
2/2000
4-34 DocuPrint N24, N32, N40, N3225 and N4025