Xerox DocuPrint N24 Service Manual page 538

Replacement
1 Reinstall the IN Gate Solenoid Spring onto the Solenoid plunger.
2 Slide the end of the Solenoid plunger into the slot in the IN Gate Link.
3 Reinstall the Solenoid and attached IN Gate Link onto the frame, making sure the tab on the Link
fits into the slot in the frame.
4 Use two small brass screws to secure the Solenoid to the frame.
5 Reinstall the Bracket to the frame, and use the screws to secure the Bracket.
6 Reconnect P/J 812 to the Mailbox Control PWB.
7 Reinstall the Mailbox Rear Cover Assembly.
3/99
Options 8-100 DocuPrint N24, N32 and N40 Service Manual