Rep 8.5.3.88 Roller Unit - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.5.3.88 Roller Unit

Parts List on PL 8.5.2.23

1 Switch off the printer power and disconnect the AC Power Cord.

2 Roll the Finisher away from the printer until it stops.

3 Remove the two screws securing the Transport Rear Cover to the Transport Assembly, and

remove the Cover (REP 8.5.3.1).

4 Slide the Roller Unit off of the Bracket Assembly shaft.

1 Position the Roller Unit so the flat end of the Roller faces away from the Bracket.

2 Slide the Roller onto the Bracket Assembly shaft.

3 Reinstall the Transport Rear Cover.

4 Reconnect the Finisher to the Printer.

DocuPrint N24, N32 and N40 Service Manual

Figure 8.5.3.88a. Roller Unit.

Table of Contents