Xerox DocuPrint N24 Service Manual page 181

Replacement
1 Open Duplex Unit, if installed and the Upper Left Cover Assembly.
2 Position the Fuser Assembly with the plug on the left end of the Assembly aligned with the jack
mounted on the printer frame.
3 Open the Left Front Cover.
4 Slide the Fuser Assembly into the printer frame until it stops.
5 Firmly push the Fuser Assembly to make sure the P/J is mated correctly and that the two thumb
screw line up with the two screw holes in the printer frame.
6 Use two thumb screws to secure the Fuser Assembly to the printer frame.
7 Close the Upper Left Cover and the Duplex Unit, if installed.
8 Verify proper operation.
DocuPrint N24, N32, N40, N3225, and N4025
2/2000
4-67 Repair Procedures