Replacement
1 Install the Toner Sensor and press the harness into the harness channel.
2 Reconnect the sensor harness to P127 on the Printer Engine Controller PWB.
3 Reinstall the Main Drive Assembly.
4 Reinstall the Left Cover Interlock Switch Assembly.
5 Reinstall the Upper Rear Cover Assembly.
6 Reinstall the Fuser Full Cover.
7 Reinstall the EP Cartridge and close the Left Upper Cover Assembly.
8 Verify proper operation.
2/2000
Repair Procedures
4-98
DocuPrint N24, N32, N40, N3225 and N4025