Rep 8.4.3.17 Tray 4 Retard Assembly - Xerox DocuPrint N24 Service Manual

REP 8.4.3.17 Tray 4 Retard Assembly

Parts List on PL 8.4.2.8
Removal
1 Switch the printer power off and disconnect the AC power cord.
2 Remove HCF Rear Cover (REP 8.4.3.1).
3 Remove the two screws that secure the Stopper Bracket. Remove the bracket (Figure
8.4.3.17a).
4 Remove Tray 4 Feed Clutch (REP 8.4.3.9) (Figure 8.4.3.17a).
5 Remove the screw that secures the Tray 4 Gear stopper (Figure 8.4.3.17a). Remove the Gear
Stopper.
6 Remove the Tray 4 Retard Gear (Figure 8.4.3.17a).
7 Open Tray 4.
8 Lower the HCF Left Cover Assembly.
9 Release the Tray 4 Retard Spring (Figure 8.4.3.17a).
10 Remove the screw that secures the Retard Support (Figure 8.4.3.17a). Remove the support.
11 Remove Tray 4 Retard Assembly (Figure 8.4.3.17a).
DocuPrint N24, N32 and N40 Service Manual
Figure 8.4.3.17a. Tray 4 Retard Assembly.
3/99
8-215 Options