Rep 8.2.3.10 Gate Solenoids - Xerox DocuPrint N24 Service Manual

REP 8.2.3.10 Gate Solenoids

Parts List on PL 8.2.2.5
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove Mailbox Left Cover Assembly (REP 8.2.3.1).
3 Remove the Mailbox Front Cover Assembly (REP 8.2.3.2).
4 Remove the Mailbox Rear Cover Assembly (REP 8.2.3.3).
5 Remove the Mailbox Top Cover Assembly (REP 8.2.3.4).
6 Remove all of the BINs above the BIN of the Solenoid you want to remove. For example: If you
want to remove Gate Solenoid 5, first remove BIN 1 (REP 8.2.3.7) and BINs 2 through 4 (REP
8.2.3.9).
7 Disconnect the P/J for the solenoid from the Mailbox Control PWB (Figure 8.2.3.10a).
8 Loosen, do not remove, the screw securing the Solenoid to the Mailbox (Figure 8.2.3.10a).
9 Release the Solenoid plunger from the end of the Gate, and remove the Solenoid (Figure
8.2.3.10a).
DocuPrint N24, N32 and N40 Service Manual
Figure 8.2.3.10a. Gate Solenoids.
3/99
8-95 Options