REP 4.4.2 Registration Sensor
Parts List on PL 6.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Duplex Unit, if installed.
3 Open the Left Upper Cover Assembly.
4 Squeeze the locking tabs on each side of the Sensor and pull the sensor out (Figure 4.4.2a).
5 Disconnect the harness from the rear of the sensor (Figure 4.4.2a).
Replacement
1 Assemble in reverse order.
2 Verify proper operation.
Repair Procedures
Figure 4.4.2a. Registration Sensor.
2/2000
4-56
DocuPrint N24, N32, N40, N3225 and N4025