Xerox DocuPrint N24 Service Manual page 952

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

7- Finisher Bins

The Eject Roll and Paddle Assembly drive the paper out into a Finisher Bin. The Elevator raises or

lowers the Finisher so one of the three Bins is opposite the Eject Rolls. An ID Sensor informs the Fin-

isher PWB when the selected Bin is in position. Sensors monitor the level of paper in each bin. Motors in

each of the three bins lower each bin as that bin starts to fill with paper.

Offset Paper Path Components

1 Top, Middle, and Lower Bins

Raised or lowered as a unit. The selected Bin stops in front of the Eject Rolls.

2 Finisher Motors for the Top, Middle, and Lower Bins

Raises or lowers each Bin to accommodate the amount of paper ejected into the Bin.

3 Finisher Paper Sensors for the Top, Middle, and Lower Bins

Monitors the presence of paper in each Bin.

4 Finisher Full Sensors for the Top, Middle, and Lower Bins

Monitors when each Bin is 100% full.

5 Finisher Half Full Sensors for the Top, Middle, and Lower Bins

Monitors when each Bin is 50% full.

DocuPrint N24, N32 and N40 Service Manual

Chapters

Table of Contents