REP 4.6 Laser
REP 4.6.1 Laser Assembly
Parts List on PL 7.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the LVPS (REP 4.10.2).
3 Disconnect the three P/J connectors and the video cable from the Laser (Figure 4.6.1a).
4 Remove the four screws that secure the Laser to the printer frame (Figure 4.6.1a).
5 Lift the Laser Assembly off of the printer frame.
6 Place the Laser Assembly on a flat and stable surface.
CAUTION Do not remove covers or disassemble the Laser Assembly. There are no replaceable
parts or field adjustable points located inside the Laser Assembly.
Repair Procedures
Figure 4.6.1a. Laser Assembly.
2/2000
4-64
DocuPrint N24, N32, N40, N3225 and N4025