REP 4.1.4 Lower Rear Cover
Parts List on PL 1.3
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 If connected, disconnect the Duplex Module, Mailbox, and High Capacity Feeder Interface
Cables.
3 Remove the two screws securing the Lower Rear Cover to the printer frame (Figure 4.1.3a).
4 Lift the cover 1/4" (6 mm), pull the Rear Cover away from the printer frame (Figure 4.1.3a).
Replacement
1 Assemble in reverse order.
2 Verify proper operation.
Repair Procedures
Figure 4.1.4a. Rear Cover Assembly.
3/99
4-10
DocuPrint N24, N32 and N40 Service Manual