REP 8.5.3.1 Finisher
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Move the Finisher away from the printer.
3 Remove the screw from the end of the Docking Rail, and remove the Docking Rail (Figure
8.5.3.1a).
4 Disconnect the Finisher interface cable from the rear of the printer (Figure 8.5.3.1a).
5 Disconnect the Finisher AC power cord from the right side of the printer (Figure 8.5.3.1a).
6 Roll the Finisher away from the printer.
Options
Figure 8.5.3.1a. Finisher Removal
3/99
8-314
DocuPrint N24, N32 and N40 Service Manual