Xerox DocuPrint N24 Service Manual page 781

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

1 Position the Full Sensor into the Sensor cutout in the Sensor Bracket.

2 Reconnect P861 to the Full Sensor.

3 Position the Half Sensor into the Sensor cutout in the Sensor Bracket.

4 Reconnect P860 to the Half Sensor.

5 Reinstall the Sensor Bracket on the Bin Frame, ensure the Limit Actuator tab is aligned properly

in the Sensor Bracket. Use screw to secure the Bracket.

6 Reinstall the Rear Cover.

7 Reinstall the Bottom Bin Assembly.

8 Reinstall the Harness Cover.

DocuPrint N24, N32 and N40 Service Manual

Chapters

Table of Contents