Rep 8.2.3.11 Mailbox Exit Roll - Xerox DocuPrint N24 Service Manual

REP 8.2.3.11 Mailbox Exit Roll

Parts List on PL 8.2.2.4
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the ACT Cover Assembly (REP 8.2.3.5).
3 Remove the Bin Assembly of the Exit Roll you want to remove (REP 8.2.3.7)(REP 8.2.3.9).
4 Rotate the Gate 90° and remove it from the Bin Assembly (Bins 2 through 10).
5 Remove the two E-rings from the Pulley end of the Mailbox Exit Roll (Figure 8.1.3.11a).
6 Slide the Drive Pulley, Collar off of the Roll (Figure 8.1.3.11a).
7 Push the Bearing out of the hole and along the Roll (Figure 8.1.3.11a).
8 Slide the Roll out of the holes in the Bin, and remove the Roll (Figure 8.1.3.11a).
DocuPrint N24, N32 and N40 Service Manual
Figure 8.2.3.11a. Exit Roll.
3/99
8-97 Options