Rep 8.5.3.37 Middle Bin - Xerox DocuPrint N24 Service Manual

REP 8.5.3.37 Middle Bin

Parts List on PL 8.5.2.7
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Harness Cover (REP 8.5.3.8).
3 Remove the Middle Bin Assembly (REP 8.5.3.28).
4 Remove the Middle Bin Rear Cover (REP 8.5.3.29).
5 Remove the Middle Bin Motor (REP 8.5.3.34)
6 Remove the Middle Bin Front Cover (REP 8.5.3.35).
7 Remove both Middle Bin Drive Belts (REP 8.5.3.36).
8 Remove the Middle Bin Paper Sensor (REP 8.5.3.32) and Sensor Actuator.
9 Slide the Bin out of the slots in the Front and Rear Bin Frames, and remove the Bin (Figure
8.5.3.37a).
10 Remove the four screws securing the Carriage to the Bin, and remove the Bin (Figure 8.5.3.37a).
Replacement
1 Reinstall the Carriage onto the Bin, and use four screws to secure the Carriage.
2 Reinstall the Bin into the slots in the Front and Rear Bin Frames.
3 Reinstall the Middle Bin Paper Sensor and Sensor Actuator.
4 Reinstall both Middle Bin Drive Belts.
5 Reinstall the Middle Bin Front Cover.
6 Reinstall the Middle Bin Motor.
7 Reinstall the Middle Bin Rear Cover.
8 Reinstall the Middle Bin Assembly.
9 Reinstall the Harness Cover.
Options
3/99
8-368 DocuPrint N24, N32 and N40 Service Manual