Rep 8.5.3.42 Top Bin Paper Sensor - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.5.3.42 Top Bin Paper Sensor

Parts List on PL 8.5.2.9

1 Switch off the printer power and disconnect the AC Power Cord.

2 Remove the Harness Cover (REP 8.5.3.8).

3 Remove the Top Bin Assembly (REP 8.5.3.38).

4 Turn the Bin Assembly upside down. Remove the three screws that secure the Back Cover to the

bottom of the bin (Figure 8.5.3.42a).

5 Remove the screw securing the Paper Sensor Bracket to the Bin, and remove the Bracket along

with the attached Paper Sensor (Figure 8.5.3.42a).

6 Disconnect J250 from the Sensor (Figure 8.5.3.42a).

7 Press in and release the Sensor latches that are securing the Sensor to the Bracket, and remove

1 Position the Top Bin Paper Sensor and insert it into the Sensor cutout in the Sensor Bracket.

2 Reconnect J250 to the Sensor.

3 Reinstall the Sensor Bracket making sure to align the position holes in the Bracket.

4 Use one screw to secure the Bracket to the Bin.

5 Reinstall the Back Cover to the Bin, and use three screws to secure the Cover.

6 Reinstall the Top Bin Assembly.

7 Reinstall the Harness Cover.

Figure 8.5.3.42a. Paper Sensor.

DocuPrint N24, N32 and N40 Service Manual

Table of Contents