Rep 8.4.3.22 Tray 5 Retard Assembly - Xerox DocuPrint N24 Service Manual

REP 8.4.3.22 Tray 5 Retard Assembly

Parts List on PL 8.4.2.10
Removal
1 Switch the printer power off and disconnect the AC power cord.
2 Remove HCF Rear Cover (REP 8.4.3.1).
3 Remove the Tray 5 Feed Clutch (REP 8.4.3.9) (Figure 8.4.3.22a).
4 Remove the screw that secures the Gear Stopper. Remove the Gear Stopper (Figure 8.4.3.22a).
5 Remove the Retard Gear (Figure 8.4.3.22a).
6 Remove Tray 5.
7 Release the Tray 5 Retard Spring (Figure 8.4.3.22a).
8 Push the Retard Assembly to the rear to release the pivot pin, then remove the assembly toward
front of machine.
Options
Figure 8.4.3.22a. Tray 5 Retard Assembly.
3/99
8-224 DocuPrint N24, N32 and N40 Service Manual