Replacement
1 Position the Mailbox Belt as shown in the illustration, and reinstall the Belt onto the Drive Pulleys.
Make sure you reinstall the Belt over the four Tension Pulleys, as shown by the arrows in the
illustration.
2 Reinstall the Mailbox Drive Gear.
3 Push up on the Mailbox Drive Transport Bracket while you reinstall the Belt onto the Mailbox
Drive Gear.
4 Reinstall the Mailbox Drive Motor Assembly.
5 Reinstall the Mailbox Rear Cover Assembly.
6 Reinstall the Mailbox Front Cover Assembly.
7 Reinstall the Mailbox Left Cover Assembly.
8 Verify proper operation.
Options
3/99
8-92
DocuPrint N24, N32 and N40 Service Manual