Rap 8.5.7.4 Error Code "Paper Jam Clear Area H - Xerox DocuPrint N24 Service Manual

RAP 8.5.7.4 Error Code "Paper Jam Clear Area H"

1 Raise the Compiler Cover and inspect the paper path for paper scraps or obstructions that may
cause a paper jam. The Compiler area is free of paper scraps and obstructions.
Y N
|
Remove the paper scraps.
2 Enter Diagnostic Mode - Input H/L - Finisher Compil Sensor/Switch - Paper Sensor. Raise the
Compiler Cover. Actuate and deactuate the Compiler Paper Sensor. The Control Panel LCD
displays H when the Sensor is actuated and L when the Sensor is deactuated.
Y N
|
Replace the Compiler Paper Sensor (REP 8.5.3.51).
3 Enter Diagnostic Mode - Output - Finisher Operations - Eject FWD Low, to check the Eject Motor
in forward rotation. With the Eject Motor running, inspect the Eject Roll. The Eject Motor runs and
the Eject Rolls rotate.
Y N
|
Replace the Eject Motor (REP 8.5.3.81).
4 Enter Diagnostic Mode - Output - Finisher Operations - Eject Reverse, to check the Eject Motor
in reverse rotation. With the Eject Motor running, inspect the Eject Roll. The Eject Motor runs and
the Eject Rolls rotate.
Y N
|
Replace the Eject Motor (REP 8.5.3.81).
5 Inspect the Eject Roll. The Eject Roll is clean, undamaged, and free of obvious wear.
Y N
|
Replace the Eject Shaft Assemblies (REP 8.5.3.61).
6 Replace the Finisher PWB (REP 8.5.3.83). The error code reappears.
Y N
|
Problem solved.
7 Replace the Printer Engine Controller PWB (REP 4.10.6).
DocuPrint N24, N32 and N40 Service Manual
3/99
8-541 Options