Xerox DocuPrint N24 Service Manual page 677

Drive for Tray 4
The HCF Drive PWB switches on the Feed Motor. The HCF Drive Belt transmits the drive energy from
the Feed Motor to Tray 4 Drive Gear 1. Gear 1 transmits drive to Tray 4 Drive Gear 2, which in turn
transmits drive to Tray 4 Take Away Gear and Tray 4 Feed Clutch. When the HCF Drive PWB actuates
Tray 4 Feed Clutch, the Clutch transmits drive to the Tray 4 Feed Roll and to the Retard Roll.
Lift Motor Operation for Tray 4
The Tray 4 Lift Motor rotates the Bottom Plate Lift Pulley. Two cables are attached to each end of the
Pulley. The other ends of the cables are attached to the four corners of the bottom plate. When the Motor
rotates the Pulley, the cables wrap around the Pulley and raise the bottom plate.
3/99
DocuPrint N24, N32 and N40 Service Manual 8-239 Options