Rep 4.7.2 Fuser Drive Assembly - Xerox DocuPrint N24 Service Manual

REP 4.7.2 Fuser Drive Assembly

Parts List on PL 10.2
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove EP Cartridge (REP 4.5.1).
3 Remove the Fuser Full Cover (REP 4.1.1).
4 Remove Top Cover Assembly (REP 4.1.2).
5 Remove the Fuser Assembly (REP 4.7.1).
6 Remove Duct Bottom (Figure 4.7.2a) (the Offset Assemblies have been removed for clarity in the
illustration).
7 Release the two springs that are connected to the Fuser Drive Assembly.
8 Remove the E-ring that secures the Drive Assembly to the frame (Figure 4.7.2a).
9 Remove the Fuser Drive Assembly.
Repair Procedures
Figure 4.7.2a. Fuser Drive Assembly.
2/2000
4-68 DocuPrint N24, N32, N40, N3225 and N4025