Rep 8.5.3.87 In Gate Interlock Switch - Xerox DocuPrint N24 Service Manual

REP 8.5.3.87 In Gate Interlock Switch

Parts List on PL 8.5.2.23
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Roll the Finisher away from the printer until it stops.
3 Remove the two screws securing the Transport Rear Cover to the Transport Assembly, and
remove the Cover (REP 8.5.3.1).
4 Disconnect P/J260 from the IN Gate Interlock Switch.
5 Squeeze the latches that are located at the rear of the Switch, and pull the Switch off of the
Bracket Assembly.
Replacement
1 Position the IN Gate Interlock Switch and press the Switch latches into the cutouts in the Bracket
Assembly.
2 Reconnect P/J260 to the Switch.
3 Reinstall the Transport Rear Cover.
4 Reconnect the Finisher to the Printer.
Options
Figure 8.5.3.87a. In Gate Interlock Switch.
3/99
8-452 DocuPrint N24, N32 and N40 Service Manual