Rap 8.5.7.18 Error Code "Fin Fail H5-86 Power Off/On - Xerox DocuPrint N24 Service Manual

RAP 8.5.7.18 Error Code "Fin Fail H5-86 Power Off/on"

1 Enter Diagnostic Mode - Input H/L - Finisher Stacker Sensor/Switch - Lower Limit Sw, to test the
Stacker Lower Limit Switch. Actuate and deactuate the Stacker Lower Limit Switch. The Control
Panel LCD displays H when the switch is actuated and L when deactuated.
Y N
|
Replace the Stacker Lower Limit Switch (REP 8.5.3.13).
2 Enter Diagnostic Mode - Output - Finisher Operations - Stacker Elev CW, to raise the Stacker
Bins. Enter Diagnostic Mode - Output - Finisher Operations - Stacker Elev CCW, to lower the
Stacker Bins. The Stacker Bins actuate the Lower Limit Switch.
Y N
|
Replace the Elevator Motor (REP 8.5.3.17).
3 Replace the Finisher PWB (REP 8.5.3.83). The error code reappears.
Y N
|
Problem solved.
4 Replace the Printer Engine Controller PWB (REP 4.10.6).
Options
3/99
8-556 DocuPrint N24, N32 and N40 Service Manual