Rep 8.5.3.14 Upper Limit Switch - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.5.3.14 Upper Limit Switch

Parts List on PL 8.5.2.3

1 Switch off the printer power and disconnect the AC Power Cord.

2 Disconnect the Finisher from the Printer (REP 8.5.3.1).

3 Remove the Transport Assembly (REP 8.5.3.11).

4 Remove the Upper Left Cover (REP 8.5.3.12).

5 Remove the four screws securing the Tie Plate to the Finisher frame (Figure 8.5.3.14a). Remove

the Tie Plate.

6 Remove the two screws securing the Upper Limit Switch Cover (Figure 8.5.3.14a). Remove the

7 Disconnect J273 from the Upper Limit Switch (Figure 8.5.3.14a).

8 Remove the two screws securing the Upper Limit Switch to the Finisher frame (Figure 8.5.3.14a),

and remove the Switch.

Figure 8.5.3.14a. Upper Limit Switch.

DocuPrint N24, N32 and N40 Service Manual

Table of Contents