Rep 8.5.3.54 Unload While Run Switch - Xerox DocuPrint N24 Service Manual

REP 8.5.3.54 Unload While Run Switch

Parts List on PL 8.5.2.16
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Stapler Door Inner Cover Assembly (REP 8.5.3.3).
3 Remove the screw securing the Switch Bracket to the Finisher frame (Figure 8.5.3.54a), and
remove the Bracket.
4 Disconnect J836 from the Switch (Figure 8.5.3.54a).
5 Remove the screw securing the Switch to the Bracket (Figure 8.5.3.54a), and remove the Switch.
Replacement
1 Reinstall the Unload While Run Switch onto the Switch Bracket.
2 Use one screw to secure the Switch to the Bracket.
3 Reconnect J836 to the Switch.
4 Reinstall the Bracket to the Finisher frame, and use one screw to secure it to the frame.
5 Reinstall the Stapler Door Inner Cover Assembly.
Options
Figure 8.5.3.54a. Unload While Run Switch.
3/99
8-398 DocuPrint N24, N32 and N40 Service Manual