Xerox DocuPrint N24 Service Manual page 829

Replacement
1 Position the Tamper Home Sensor into the Sensor cutout in the Sensor Bracket.
2 Reconnect P839 to the Sensor
3 Reinstall the Tamper Home Sensor Bracket onto the Compiler Bin, and use one screw to secure
the Bracket.
4 Reinstall the Tie Plate and use the four screws to secure it to the frame.
5 Reinstall the Upper Left Cover.
6 Reinstall the Transport Assembly.
7 Reinstall the Upper Rear Cover.
8 Reinstall the Stapler Door Inner Cover Assembly.
9 Reconnect the Finisher to the printer.
DocuPrint N24, N32 and N40 Service Manual
Figure 8.5.3.50b. Home Sensor.
3/99
8-391 Options