REP 8.2.3.14 Mailbox Control PWB
Parts List on PL 8.2.2.7
Removal
1 Switch off the printer power and disconnect the AC
Power Cord.
2 Remove Mailbox Left Cover Assembly (REP 8.2.3.1).
3 Remove the Mailbox Rear Cover Assembly (REP 8.2.3.3).
4 Disconnect the thirteen P/Js from the Mailbox Control PWB.
5 Remove the four screws securing the Mailbox Control PWB to the Mailbox frame, and remove
the PWB (Figure 8.2.3.14a).
DocuPrint N24, N32 and N40 Service Manual
Figure 8.2.3.14a. Mailbox Control PWB.
3/99
8-103
CAUTION
These components are susceptible
to electrostatic discharge. Observe
all ESD procedures to avoid
damage.
Options