Replacement
1 Reinstall the Rear Cover by first latching the top of the Cover, then by using one screw to secure
Cover to the bin frame.
2 Route the wire harness through the opening at the rear of the Cover and slide the Rear Harness
Cover into place.
3 Reconnect J888 on the bottom of the bin.
4 Secure the cable clamp with the screw.
5 Secure the Back Cover using the three screws.
6 Reinstall the Bottom Bin Assembly.
7 Reinstall the Harness Cover.
DocuPrint N24, N32 and N40 Service Manual
Figure 8.5.3.19b. Bottom Bin Rear Cover.
3/99
8-341
Options