Rep 8.3.3.6 Envelope Feeder Motor - Xerox DocuPrint N24 Service Manual

REP 8.3.3.6 Envelope Feeder Motor

Parts List on PL 8.3.2.2
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Envelope Feeder from the base engine.
3 Remove the Bottom Cover (REP 8.3.3.1).
4 Remove the Top Cover (REP 8.3.3.2).
5 Remove the Rear Cover (REP 8.3.3.4).
6 Disconnect the P/J from the Envelope Feeder Motor (Figure 8.3.3.6a).
7 Remove four screws securing the Motor to the Motor Bracket, and remove the Motor (Figure
8.3.3.6a).
Replacement
1 Reinstall the Motor onto the Motor Bracket, and use four screws to secure the Motor to the
Bracket.
2 Reconnect the P/J to the Envelope Feeder Motor.
3 Reinstall the Rear Cover.
4 Reinstall the Top Cover.
5 Reinstall the Bottom Cover.
6 Verify proper operation.
Options
Figure 8.3.3.6a. Envelope Feeder Motor.
3/99
8-142 DocuPrint N24, N32 and N40 Service Manual